the basic operating principle retort company news news 诸城市安泰机械有限公司-凯发官网

i produced retorts basic working principle :

1 , sterilization pot ministry of the tank, when the material is loaded sterilization basket and closed the door pan .

2 , the circulation pump in the tank after the filter sterilizing water is withdrawn and fed to the heat exchanger is heated using steam .

3, from the top of the sterilization basket evenly spray water in the tube material at the desired sterilization . because circulating volume, pan temperature is very uniform. plc automatically open or close the steam valve according to the measured temperature of the sterilizing water .

4 calculates the temperature of the pot in this desired pressure automatic control , exhaust valve switching , so that the whole sterilization process the pressure and temperature in the pot into a certain relationship. when the retort heating and insulation in the state , steam valves and traps open automatically , cooling water valve automatically closes ; when retorts in a cooled state , the steam valves and traps automatically shut down , cooling water inlet and outlet valves open automatically.

5 , after the sterilization , the circulation pump is stopped , the circulating water tank back to the pot to prepare for the next cycle of use .
our company produces retorts , as well as horizontal retorts , dual-chamber sterilization pot , etc., must be able to find more view http://www.zcatjx.com sterilization equipment you need.